PeriSphera AT vaginal probe, thin

Thin electrotherapy probe for the effective treatment of vaginismus and female urinary incontinence. It can also be used for electrostimulation and biofeedback.

The PeriSphera AT probe is made of biocompatible plastic with a gold-plated, nickel-free coating, making it suitable for those with metal sensitivities.

It features a dual circuit, making it ideal for two-channel stimulators. It delivers impulses to both sides of the pelvic floor muscles simultaneously.

The PeriSphera AT probe must NOT be sterilized or boiled. Before and after use, wash it with antibacterial soap and lukewarm water. It is recommended to replace it every 6–12 months for hygiene reasons.

• Total probe length: 120 mm
• Insertable length: 60 mm
• Diameter: 11 mm
• Weight: 23 g

Instructions for Using the Treatment Probe

1. Before use, clean the probe with soapy water and dry it.
2. Use a conductive gel designed for electrotherapy. Make sure the gel fully covers the electrode surfaces but does not enter the connector ports.
3. Ensure your device is turned off when connecting the treatment probe.
4. Connect the cable plugs to the probe’s connector ports.
5. Insert the probe into the vaginal opening so both spheres are inside and the stopper remains outside.
6. After use, turn off the device before removing the probe from your body. Do not pull on the cable; grip the probe handle. Then disconnect the cable connection.
7. Clean the probe again, dry it, and store it in a sealed pouch.
8. Clean the treated area of gel residue with soapy water and dry it.
9. The probe can be disinfected with standard household disinfectants.
10. Do not sterilize in an autoclave.